Table of Contents

ow_reset

WMPRO >= 1.0 WMMEGA FW >= 2.0

Reset the OneWire bus

Description

ow_reset ( )

This function sends a reset signal to the OneWire bus. This is a low level function for custom OneWire bus operations.

Parameters

None

Return Values

None

Example

<?
  ow_reset();
?>

See Also

ow_first() - Initiate a OneWire bus scan and return the address of the first device found

ow_next() - Return the address of the next OneWire device found (after an ow_first)

ow_read_temp() - Read a temperature from a device on the OneWire bus

ow_read() - Read a byte from the OneWire bus

ow_write() - Write a byte to the OneWire bus