======ow_reset====== WMPRO >= 1.0 WMMEGA FW >= 2.0 Reset the OneWire bus ====Description==== ow_reset ( ) This function sends a reset signal to the OneWire bus. This is a low level function for custom OneWire bus operations. ====Parameters==== None ====Return Values==== None ====Example====

====See Also==== [[ow_first()]] - Initiate a OneWire bus scan and return the address of the first device found [[ow_next()]] - Return the address of the next OneWire device found (after an ow_first) [[ow_read_temp()]] - Read a temperature from a device on the OneWire bus [[ow_read()]] - Read a byte from the OneWire bus [[ow_write()]] - Write a byte to the OneWire bus