====== MQTT Configuration ======

As of Firmware x.1311 onwards, we have added several more MQTT configuration parameters that can currently be configured through the INI located in /config/mqtt.ini.

In the [config] section you can set the following key/value pairs:

^ Key      ^ Value                          ^
| enabled  | 1 or 0 to enable/disable MQTT  |
| debug  | 1 or 0 to enable/disable debug logging  |
| mqtt_keepalive  | Keepalive at connect - setting  to 0 causes issues on some mosquitto installs  |
| mqtt_timeout  | Connect timeout in seconds before raising an error  |
| mqtt_port  | Remote port number (usually 1833)  |
| mqtt_protocol  | Protocol shared during connect.  Can be 3 for MQTT v3.0 or 311 for MQTT v3.1.1  |
| enabled  | 1 or 0 to enable/disable TLS security  |
| mqtt_id  | Connect ID.  If it's blank the MAC address will be used  |
| mqtt_server  | Server host name  |
| mqtt_user  | MQTT connect username  |
| mqtt_password  | MQTT connect password  |