C752

75A Dual Channel Hall Effect Current Sensor Module

The C752 Current Sensor module has two hall effect current transducers that measure up to 75A DC (bidirectional) on each channel. Each channel is measured with a 12-bit analog to digital converter, giving readings of an accuracy of about 60 mA over the full range of 150 Amps (75 in either direction). Digital low pass filtering is used to average the value to reduce noise.

This module is typically used to measure solar energy produced on channel and load on the second channel. Multiple modules can be integrated into a single Wattmon setup when measuring additional sources such as wind or multiple panels or loads.

Please note that this product will be phased out shortly in favor of the C1002 Dual Current Sensor sensor, so please contact us before placing an order to ensure that stock is available.

 

Applications

 

Specifications

Inputs
2 x Hall Effect Sensors, bidirectional
Current
Max 75A per channel
Connectors
2 RJ-45 with Modbus RTU protocol
Protocol
Modbus RTU over Rs-485

 

Connection Diagram

More Information

For more detailed information, please click the following links:

 

 



Wattmon Add On Devices

DS18B20

DS18B20 Waterproof Temperature Sensor on Dallas Onewire bus with RJ45 connector

View

IF1

Frequency and Counter Module with 0.1Hz to kHz resolution and Modbus RTU communication

View

IP1

PWM Output Module with high voltage DC sense input and Modbus RTU communication

View

I3O2

3 Digital Inputs and 2 Relay Output Module with Modbus RTU communication

View

C252

25A Dual Channel Current Sensor module with Modbus RTU communication

View

C502

50A Dual Channel Current Sensor module with Modbus RTU communication

View

C752

75A Dual-Channel Current sensor module with Modbus RTU communication

View

 

A5S1

5-Channel Analog Input and 1-Channel Shunt Module with Modbus RTU communication

View